SIA · WOOD, PAINT AND METAL
Sia abrasives for wood, paint and metal
The Sia abrasive range includes discs, cloth rolls and nonwoven products. The right result depends on the workpiece material and starting surface, as well as the required removal, finish, tool and mounting. Compare the documented product variants in the listing and tell us about your application.
01
Sia product categories
Sia abrasive belts
Sia abrasive discs
Sia hook-and-loop discs
02
Selection criteria
Which Sia variant suits the job?
Start with the workpiece: wood and paint call for a different choice from unalloyed steel or non-ferrous metal. Decide whether you need to remove material, prepare a coating or produce an even finish. Review the abrasive you use now: does it clog, remove too little material or fail to follow the contour?
Then compare backing and product form, grit and mounting. The range includes 1919 siawood + discs for wood and paint, 1950 siaspeed discs for filler and paint, 2820 siamet discs for metal, 2936 siatur jj cloth rolls for profiles and 6120 siafleece nonwoven abrasives for conformable finishing. The specifications of each variant decide its suitability.
03
SIA ABRASIVES
Sia abrasives in the range
The filterable listing shows the assigned Sia products, including discs, rolls and nonwoven abrasives in different series, shapes, grits and mountings. Each product record gives the specific variant.
No products found
No products are currently listed in this category. Request a call back and we will help you find the right product.
Request a callback04
APPLICATION BASED SELECTION
Match product properties to the tool and target surface
For discs, check diameter, mounting and perforation against the existing backing pad and extraction system: siafast and self-adhesive variants are listed separately in the Sia range. Flexible 2936 siatur jj cloth rolls are intended to follow profiles. The mesh structure of 7900 sianet supports low-dust sanding; 6120 siafleece is a nonwoven abrasive for conformable surface work. These product forms are not interchangeable without checking the application.
If the current abrasive clogs too quickly or misses the target surface, tell us the material, current product, tool, process step and desired finish. Krückemeyer GmbH can process suitable coated and nonwoven abrasives into rolls, belts or shaped pieces. Material, backing, geometry and application determine which format can actually be made. A separate selection guide covers Sia abrasive belts.
05
QUESTIONS ABOUT SIA SELECTION
How do Sia abrasive discs and nonwoven abrasives differ?
Sia abrasive discs and nonwoven abrasives serve different tasks. On coated discs such as 1919 siawood + or 1950 siaspeed, grain, backing, grit and mounting affect material removal and the scratch pattern. By contrast, 6120 siafleece is a siavlies disc that conforms to irregular surfaces and edges. Its product information includes finishing and the removal of heat tint among its applications. Decide first whether you need targeted stock removal or to texture and even out a surface. Then check the material and the specifications of the exact variant.
Which mounting should I check for Sia discs?
The mounting must suit the tool and backing pad already in use. The range includes siafast and self-adhesive Sia discs; siafix is also listed as a separate product form. Check the diameter and perforation as well. The 1919 siawood + series, for example, contains variants both with and without perforation. A shared series name therefore does not guarantee the same mounting or dust extraction arrangement. Include the tool, pad, current disc and required format in your enquiry so we can assess the specific variant.
When is a Sia cloth roll useful for profiles?
A flexible cloth roll is worth considering when the abrasive needs to follow contours and curves. The listed 2936 siatur jj is such a roll, and its product description names profile and contour sanding as applications. Whether it delivers the required finish still depends on the material, starting condition, grit and working method. Compare the existing sanding step and the surface it produces before changing the grit alone. If you need a belt format, the suitability of the particular base material for converting must also be checked.
What information is needed for an enquiry about converted Sia abrasives?
Provide the base material or current product, workpiece material, task, target surface, machine, shape and dimensions. Krückemeyer GmbH processes suitable coated and nonwoven abrasives; possible results include rolls, belts and shaped pieces. Die cutting, cutting and, where the material is suitable, laser cutting are within the documented production scope. That does not establish that every combination of material, dimensions and format is feasible. We assess backing, geometry and application individually and agree a delivery format suited to your process.
06
Request advice
Tell us the material, starting surface, sanding step, target result and abrasive currently in use. Details of the machine, mounting and format help us assess Sia products and suitable converting for your application.
Enquire about Sia abrasives
Know the application but still need to choose the series or variant? Describe your workpiece, tool and target surface so we can discuss the selection with you.
ABRASIVES CONSULTATION
Jürgen Müller
Contact for products
Jürgen Müller will discuss the material, sanding step and suitable Sia variant with you.