Skip to main navigation Skip to main content Skip to page footer

01

Selection criteria

Define the material and sanding task before the grit

Start with the material, the condition of the surface and the finish you want. For paint, coatings and filler, Klingspor specifies PS 11 C for wet and dry sanding; PS 30 D is specified for wood as well as paint, coatings and filler. Then examine the abrasive grain, coating and paper backing: PS 11 C has silicon carbide on C paper with a closed coating, while PS 30 D has aluminium oxide on D paper with a semi-open coating. The sheet currently in use and its performance help you assess removal, clogging and service life.

02

KLINGSPOR SANDING SHEETS

Klingspor sanding sheets in the range

The product listing shows Klingspor sanding sheets. Compare the listed sheets by material, grit and version; the product data describes the features of each variant.

No products found

No products are currently listed in this category. Request a call back and we will help you find the right product.

Request a callback

03

CHOOSING BY SURFACE

Match abrasive grain and backing to the finish

According to the manufacturer, PS 11 C is a water-resistant sheet for wet and dry sanding of paint, coatings, filler and plastic. PS 30 D combines aluminium oxide, a semi-open coating and D paper for wood as well as paint, coatings and filler. PS 33 B also uses aluminium oxide and a semi-open coating, but has B paper. Its suitability for a particular step depends on the surface, pressure, handling and required finish. A grit number alone is therefore insufficient. Tell us which sheet you currently use, what problem you observe and what finish you need.

04

USING KLINGSPOR SANDING SHEETS

Which Klingspor sanding sheet is suitable for wet sanding?

According to Klingspor, PS 11 C can be used for wet and dry sanding. The sheet has silicon carbide abrasive, a resin bond, a closed coating and C-paper backing. The manufacturer lists paint, coatings, filler and plastic as suitable materials. For a specific choice, also check the condition of the surface and the finish you need. Another sheet listed for dry sanding should not be assumed suitable for the same wet process simply because its grit number is similar.

How do PS 11 C and PS 30 D differ?

PS 11 C uses silicon carbide on C paper with a closed coating and is specified for wet and dry sanding. PS 30 D uses aluminium oxide on D paper with a semi-open coating; the manufacturer lists wood as well as paint, coatings and filler. The distinction therefore goes beyond grit. Which version achieves the required finish depends on the material, the starting condition and the sanding process.

What information is useful when enquiring about Klingspor sanding sheets?

Tell us the material, its current condition, the target finish and whether you sand wet or dry. The sheet you currently use, its grit and the problem you observe, such as clogging or an unwanted scratch pattern, are also useful. If you use a sheet with a machine or sanding block, specify how it is held and the required format. We can then check a listed version against its product data.

Choose a suitable Klingspor sanding sheet

Tell us about your sanding task and the surface finish you need. We can help you assess a suitable version.

Jürgen Müller

SANDING SHEET ADVICE

Jürgen Müller

Contact for products

Discuss the material, target finish and current sanding application with Jürgen Müller.